The new TEX 09PE and TEX 12PE vibro-reduced pick hammers stand out with their modern design. The new look comes together with a new way to reduce vibrations. The cylinder and other parts of the impact mechanism are enclosed in a vibro-reducing housing. Thanks to the gripping surfaces and the two handles, operators can easily find the best working postion. The front side handle is fully indexable and can be removed if necessary.
Easier Positioning - New design features limit and dampen the movement of the cylinder so that the machines feel as firm as a conventional tool. As a result the operator has very good control. This makes for easy positioning and better productivity.
SOFSTART Trigger - The hammers come with a two-step trigger that gives you full control when starting a cut - even under difficult conditions. The trigger, together with the vibro-reduction systems, give you a tool that is very easy to handle in relation to its weight and size.
Quick Tool Change with New Latch - The new latch replaces the conventional kick latch as well as the cap retainer. The latch gives quick tool changes in combination with low weight and easy operation.
Different Versions for Different Applications - The TEX 09 and TEX 12 vibro-reduced hammers come in two different versions, one with the standard hexagonal shank 7⁄8" x 3 1⁄4" and one with a round shank 1" x 3". The round shank is particulary suitable for appliations where the chisel should be free to rotate inside the hammer, e.g. in furnace stripping operations.
** FREE SHIPPING within the Continental United States
|Hammer Type||Pick Hammer|
|Air Consumption (cfm)||42|
|Impact Rate (blows/min)||1620|
|Vibration Level 3 Axes (ISO 28927-10)||4.0 m/s2|
|Sound Power Level Guaranteed, Lw (2000/14/EC)||105 dB(A)|
|Sound Pressure Level (ISO 11203) Lp, r=1m||93 dB(A)|
|Shank Size (in)||7⁄8 x 3-1⁄4|
|Spare Parts List|
|Safety and Operating Instructions|
|Paving Breaker Tools|
|3310155490||Rubber Hose with Coupling and Clamp||$30.54|
|9000030600||Standard Claw Coupling||CALL|
|9000030601||Standard Claw Coupling with Strainer||CALL|