Hydraulic Rock Drills

This lightweight tool is designed for drilling blast, anchor and rock-splitting holes. Used for example by contractors, armies and utilities who want convenient and efficient drilling without large compressors.

With standard integral steel, it drills diameters of up to 50 mm (2”) and depths down to approx. 6 m (33 ft) by using hydraulic power for impact and rotation. A small additional compressor is needed for flushing. Without airflushing, it can be operated wholly by hydraulics and can drill holes of down to 1 m (3.3 ft) with a spiral hammer drill.

Part Number		1801 3800 02
Description		LHD 23 M Rock Drill
Shank size	hex	7/8" x 4-1/4"
Weight without hoses and drill	lb	54
Service weight	lb	62.4
Oil flow	gpm	5.3-6.6
Working pressure	psi	1450-2000
Impact rate	blows/min	2400-3000
Revolutions	rpm	320-400
EHTMA class		C
Price:		$4,486
Safety & Operating Instructions		195K
Parts Breakdown		1.2M

For Paving
Breaker Tools

Need a Chicago
Pneumatic Tool?

Need a Pneumatic
Paving Breaker?

Need a Gas-Powered
Paving Breaker?