Hydraulic Post Drivers

Used for driving-in road barrier tubes, profiles, signposts, fence posts, T-posts and a wide range of anchors.

Our post drivers provide stable, powerful, high speed driving for a variety of post sizes. When operated with an optional hose-mounted remote-controlled valve, the drivers can be run with both open- or closed-center systems.

				***   NEW   ***
		Post Drivers		T-Posts and Silt Fence Drivers
		LPD-T HBP	LPD-RV HBP	KAPD-23
Activation type		By trigger lever	By remote valve	By trigger lever
Hydraulic system		Open-center	Open- or closed-center	Open-center
Weight	lb	68	64	23
Working pressure	psi	1500-2000	1500-2000	1000-1300
Oil flow	gpm	5-8	5-8	5.3
Max Backflow Pressure	psi	400	400	150
Impact rate at 30 l/min	blows/min	1500	1500	2400
Impact Energy	Foot Pounds	81	81	18
EHTMA class		C/D	C/D	C
		AC-1801404002	AC-1801405002	AC-1801174118-T
Chuck Size		Use Post driver adaptor table below		1.800"  (45mm) Custom sizes made to order
	Price:	$2,630.00	$2,630.00	$1,795.00
		LPD-T & LPD-RV Parts Breakdown
Safety and Operating Instructions:    320K      * POST DRIVER ADAPTOR CHOICE - LPD-T & LPD-RV   Part No. Price   Universal Adaptor AC-3371806033 $38.58 Round Adaptor 3.8" AC-3371806034 $38.58 Square Adaptor 2-1/8" AC-3371806032 $38.58			Hydraulic Power Pac Info	We can build special tooling to solve almost any post driving application Pictured here is one example a drive cap and special chuck allowing the customer to use the KAP23 to drive 2" square pipe.
				CHUCK2.5
				$150.00

  HIGH BACK PRESSURE POST DRIVERS

** NEW **
Now you can use your skid steer, backhoe, excavator or tractor to power your Post Driver. These tools are designed to work with high back pressure and represent a breakthrough in versatility.

• These units are able to work on a maximum return/back pressure of 400 PSI (200 PSI for non-high back pressure units)
• Flow requirement of 8 gpm (Same as non-high back pressure units)
• Working pressure at approximately 1500 to 1800 PSI with maximum relief valve setting at 2200 PSI. (Same as non-high back pressure units)
• *To ensure that the tool is receiving the correct flow of 8 gpm, you will need OFD 30 Oil flow divider part #1801 1642 32 Oil flow Divider (Max flow in: 32 gpm; max. pressure: 3,600 psi). No warrantee for tools damaged by over pressure when run without an oil flow divider
• **For John Deere and Bobcat skidsteer that deliver between 16 and 30GPM. Pressure Reduction Hoses must be used in conjunction with the OFD.

*OIL DIVIDERS (Required with all skidsteer)

The oil flow divider allows you to run tools from hydraulic powered carriers by reducing flow and pressure. An extension hose is required to connect the divider to the tool.

** Pressure Reduction Hoses (Required for all John Deere and Bobcat skidsteer)

Part Number	Description	Length	Couplings: flat face quick release	EHTMA class	Price
		ft	dimension
AC-9246020502	15' Twin extension hose	15	1/2 - 3/4	C/D	$448.35
AC-9246020503	30' Twin extension hose	30	1/2 - 3/4	C/D	$621.28
AC-9246020504	50' Twin extension hose	50	1/2 - 3/4	C/D	$896.70

Hydraulic Power Pac Info

Need a Gas-Powered
Paving Breaker?

Need a Pneumatic Post Driver?