Hydraulic Tools, Hydraulic Post Drivers, Paving Breakers, & Construction Tools

High Back Pressure Tools NEW

 

Use your Skid Steer to power your Breaker or Post Driver!

 

skid steer high back pressure units

Now you can use your skid steer, backhoe, excavator or tractor to power your Breaker or Post Driver. These tools are designed to work with high back pressure and represent a breakthrough in versatility.

Atlas Copco announces the launch of six (6) new High Back Pressure units for use on skidsteer loaders.

high back pressure breaker high back pressure post driver
Part No. Unit Part No. Unit
1801364288 LH 27 HBP Breaker 1 ¼ X 6 1801404002 LPD-T HBP Post Driver
1801364302 LH 28 E HBP Breaker 1 ¼ X 6 1801405002 LPD-RV HBP Post Driver
1801364304 LH 28 E HBP Breaker 1 1/8 X 6    
1801364303 LH 27 HBP Breaker 1 1/8 X 6    
  • These units are able to work on a maximum return/back pressure of 400 PSI (200 PSI for non-high back pressure units)
  • Flow requirement of 8 gpm (Same as non-high back pressure units)
  • Working pressure at approximately 1500 to 1800 PSI with maximum relief valve setting at 2200 PSI. (Same as non-high back pressure units)
  • To ensure that the tool is receiving the correct flow of 8 gpm, you will need OFD 30 Oil flow divider part #1801 1642 32 Oil flow Divider (Max flow in: 32 gpm; max. pressure: 3,600 psi). No warrantee for tools damaged by over pressure when run without an oil flow divider

 

Please contact us if you have
any questions about your application.