Hydraulic Accessories
Run Your Hydraulic Tools from your Skid Steer, Tractor or Backhoe!
Use your auxiliary hydraulics port to power your hydraulic tools by connecting an oil divider and extension hoses.
OIL DIVIDERS
The oil flow divider allows you to run tools from hydraulic powered carriers by reducing flow and pressure. An extension hose is required to connect the divider to the tool.

| Part Number | Description | Max oil flow rate | Regulated oil flow rate | EHTMA class | Price |
| gpm | gpm | ||||
| AC-1801163229 | OFD 20 Oil flow divider | 15.85 | 5.3-6.6 | C | $699.00 ![]() |
| AC-1801164232 | OFD 30 Oil flow divider | 31.00 | 6.0-10 | D | $875.00 ![]() |
|
|
|||||
Machines with excessive oil flow or pressure can still be used as a power source with an oil flow divider
*** In order for tools to run properly. Hydraulic flow and pressure must be within the tools operating range and return line back flow pressure must be less than 250psi.
*** Because tools can be damaged by hydraulic systems with excessive oil flow or pressure,
we can not warrantee or accept tools for return unless they are powered by a Atlas Copco Power Pack.
Oil flow dividers will reduce pressure and flow but will not reduce back flow pressure in some cases on machine with high oil flow, the oil flow divider can increase back flow pressure. It is recommended to check with you skid steers or tractors manufacture to verify that the hydraulic systems falls within the parameters required by the tool.
In most cases back flow pressure can be eliminated by routing return lines directly to tank.
Extension Hoses
By adding one or two 7 m (23 ft) extension hoses you can use up to 21 m (70 ft) of hose with no significant drop in pressure. The hoses are light and flexible and are fitted with flat-face, quick release couplings. (Extension hoses come as standard with LP 9-20 and
LP 13-30 P).


