PNEUMATIC BACKFILL TAMPER |
||||||||||
 |
The TEX 640 backfill tamper is designed to efficiently compact loose backfill material around utility poles and foundations as well as backfilling trenches and road reapirs. High blows per minute means that base material is compacted quickly and efficiently. The TEX 640 features a built-in lubricator which allows for the correct amount of oil during operation. An adjustable packing nut allows for proper readjustments as the packing set wears. |
|||||||||
| Part Number | Weight | Air Consumption | Length | Impact Frequency | Price | ACCESSORIES | ||||
| lbs. | cfm | in | blows/min | Part No. | Description | Price | ||||
| AC-9245997600 | TEX 640 Backfill Tamper | 40 | 38.5 | 48.25 | 800 | $835.00  |
9245998155 | Packing Nut | $QUOTE |
|
| AC-9245997601 | 40 | 38.5 | 48.25 | 800 | $835.00 |
9245998160 | 6" Malleable Iron Butt | $115.25 |
||
|
|
9245998165 | Pole Butt | $141.21 |
|||||||
| 9245999028 | 3" Aluminum Butt | $100.26 |
||||||||
 Spare Parts List |
Safety and Operating Instructions |
|||||||||
|
|
||||||||||
Pneumatic Ergonomic Scaler |
||||||||||
|
Ruggedly built, the TEX 117 is a low maintenance, long reach scaler perfect for many surface cleaning operations. Using a variety of standard accessories, the operator can chip concrete, grout, caulking or remove tiles, mastic, paint and roofing materials. The ergonomic long reach scaler reduces time consuming hand scraping and back breaking labor; it is economical to use, consuming only 7 cfm, and can operate from a small portable compressor.
|
 |
|||||||||
| Part Number | Description | Weight | Air Consumption | Length | Impact Frequency | Price | ||||
| lbs. | cfm | in. | blows/min | |||||||
| AC-9245998732 | TEX 117 Ergonomic Scaler | 17 | 7 | 70 | 2300 | $660.00 |
||||
| Spare Parts List |
||||||||||
DCT Dust Collector |
|||
|
Reduce On-Site dust and Boost Productivity Dust generated by drilling obscures vision and poses a health risk. The DCT dust collector reduces the amount of dust in the working environment. It can also increase productivity, since the drill cuttings are continuously removed. The DCT dust collector can be used with the entire range of Atlas Copco pneumatic handheld drills. The DCT dust collector works on the ejector princliple, which creates an under-pressure throughout the filter system. Since the ejector is built into the filter unit, it cannot be damaged by external influences or by drilling dust. |
|||
| Technical Data |  |
||
| Air Pressure Max | psi | 100 | |
| Ejector Air Requirement | cfm | 20 | |
| Suction Capacity | cfm | 100 | |
| Filter Area | ft2 | 14 | |
| Weight | lb | 48.4 | |
| Suction Hose | in | 1 1/2 | |
| DCT 10 Dust Collector | AC-8092040784 | $3,130.00 |
|
| Bags (25pcs) | 3217057891 | $85.00 |
|
| Spare Parts List Safety & Operating Instructions |
|||
